導入事例
ウェビナー
お問い合せ
メール配信登録
CAT6 A/B Switch - Latching RJ45 Remote Control, Dry Contact
掲載写真は類似商品になります
SW1040A
 

CAT6 A/B Switch - Latching RJ45 Remote Control, Dry Contact


A 6 position terminal strip on the rear of the unit provides remote control capability and accepts external dry contact closures as inputs for remote A/B switching.


  • Switch ports are transparent to data rates, formats, and protocols and can handle speeds up to 10 Gbps.
  • Manual control of the switch port connection state is supported through pushbutton switches on the front of the unit.
  • The connection state will be maintained if power fails or is removed.
  • Connecting (shorting) input A (pin 1) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the A position.
  • Connecting (shorting) input B (pin 3) to Ground (pin 2) for a minimum of approximately 100 msec will cause the unit to switch to the B position.
  • If desired, the A or B control input can remain connected to the Ground input, which will disable all other control interfaces including the front panel pushbutton switches from being able to switch connection states of the A/B Switch.
   
Share |
  製品       型番   単価   数量  
 
 
CAT6 A/B Switch - Latching RJ45 Remote Control, Dry Contact
 
CAT6 A/B Switch - Latching RJ45 Remote Control, Dry Contact
  SW1040A  
お問い合せ
   

アクセサリ

  製品     型番   単価   数量  
 
  GigaTrue® CAT6 UTP 550MHz パッチケーブル スナグレスブーツ付き - グレー, 0.9m
GigaTrue® CAT6 UTP 550MHz パッチケーブル スナグレスブーツ付き
  EVNSL640-0003  
¥430
   
  GigaTrue® CAT6 UTP 550MHz パッチケーブル スナグレスブーツ付き - グレー, 1.8m
GigaTrue® CAT6 UTP 550MHz パッチケーブル スナグレスブーツ付き
  EVNSL640-0006  
¥520
   


 
ナビゲーション
マニュアル
CAT6 Remotely Controlled Layer Switches Manual